Bee Cool Mobile Glass Tinting Service
Edm: 17812 118 Ave NW -
780-448-9243
Cal: 2020 32 Ave NE -
403-770-5625
Toll Free - 1-855-448-6044


Bee Cool Bee Safe 8.5m 25 Glass Security Coating Edmonton



Untreated

After Bee Safe 8.5m 25 Safety & Security Window Film Edmonton

Bee Safe 8.5m 25 Safety & Security Window Film Edmonton

Safety and Security Glass Coating Edmonton

Bee Safe 8.5m 25 is a reflective safety and security glass coating, window tint, which provides excellent heat rejection and a black chrome look from the outside. This product is fantastic for large Edmonton buildings looking to dramatically reduce HVAC costs and increase security. By blocking ultraviolet rays, deterring smash-and-grab robberies and preventing flying glass shards from causing injury during violent storms and blasts. Bee Cool Safety and Security glass coatings offer increased protection for a variety of applications.

Bee Safe Glass Coatings are virtually clear and incredibly strong. They are designed to withstand hurricane force winds, explosive pressure, vandalism and large & small high velocity debris. Bee Cool Glass Coating Edmonton films provide the maximum amounts of physical protection, optical clarity and aesthetic value. By also stopping 99% of harmful UV rays, they help ensure that your merchandise and property continue to look new for longer.

  • Designed for safety, security and blast applications.
  • Totally transparent, superior optical clarity and glare reduction with excellent solar performance.
  • Low interior reflectivity
  • Advanced adhesion formulation holds broken glass together.
  • Blocks over 99% of the sun's damaging ultraviolet rays, keeping upholstery, carpet and window treatments looking new for longer.
  • Blocks 50% of the sun's total energy, keeping your home or office significantly more comfortable.
  • Durable scratch-resistant coating.
  • Increases personal safety by minimizing flying glass in the event of breakage.
Bee Safe 8.5m 25 Safety & Security Window Film Edmonton

Broken glass can create a significant safety issue. Often when glass is smashed, small shards are scattered throughout the area. These small pieces of glass are difficult and dangerous to clean up. Bee Cool Safety and Security Glass Coatings bond to the glass, helping to keep it from scattering throughout your building, providing a barrier between broken glass and contact with any passers by, while removing a potential intruder's ability to gain quick and easy access.

    green check mark.
  • Bee Cool Safety & Security Glass Coatings have been evaluated according to the following test methods and standards:
    • Small Missile Impact Test - ANSI Z-97.1 and CPSC 16 CFR 1201
    • Large Missile Impact & Cyclic Wind Pressure Tests - ASTM E 1886-02 / ASTM E 1996-03, Level C, 4.5 lb 2" x 4"
    • GSA Explosive Test - GSA-TS01-2003
    • Flame Spread and Smoke Developed Test - ASTM E-84
Bee Safe 8.5m 25 Safety & Security Window Film Edmonton Specifications
UV Rejected 99%
Glare Reduction 70%
Winter Heat Loss Reduction 7%
Total Solar Energy Rejected 67%
Visible Light Transmittance 27%
Total Solar Transmittance 19%
Total Solar Reflectance 36%
Total Solar Absorbance 45%
Interior Visible Light Reflectance 20%
Exterior Visible Light Reflectance 35%
Winter U-Value 1.03
Shading Coefficient 0.38

Physical Properties
Film Thickness 0.0085"
Single or Multi-Ply Multi
Tensile Strength 30,400 psi
Break Strength 265 lbs/inch
Elongation at Break > 100%
Peel Strength 2750 g/inch
Puncture Strength 173 lbs
Note: all data values above are representative and are provided for comparison purposes only.