Bee Cool Mobile Glass Tinting Service
Edm: 17812 118 Ave NW -
Cal: 2020 32 Ave NE -
Toll Free - 1-855-448-6044

Bee Cool Bee Safe 8.5m 35 Glass Security Coating Chestermere


After Bee Safe 8.5m 35 Security Safety Glass Coating Chestermere

Bee Safe 8.5m 35 Security Safety Glass Coating Chestermere

Safety and Security Glass Coating Chestermere

Looking for heat rejection and security in one package? This is it! 50% of total solar energy rejected with virtually no change to natural daylight. This coating, window tint, also has Bee Cool's Night View technology. By blocking ultraviolet rays, deterring smash-and-grab robberies and preventing flying glass shards from causing injury during violent storms and blasts. Bee Cool Safety and Security glass coatings offer increased protection for a variety of applications in Chestermere.

Bee Cool Glass Coating Bee Safe laminates are virtually clear and incredibly strong. They are designed to withstand hurricane force winds, explosive pressure, vandalism and large & small high velocity debris. Bee Cool Glass Coating films provide the maximum amounts of physical protection, optical clarity and aesthetic value. By also stopping 99% of harmful UV rays, they help ensure that your merchandise and property continue to look new for longer.

  • Designed for safety, security and blast applications.
  • Totally transparent, superior optical clarity and glare reduction with excellent solar performance.
  • Low interior reflectivity
  • Advanced adhesion formulation holds broken glass together.
  • Blocks over 99% of the sun's damaging ultraviolet rays, keeping upholstery, carpet and window treatments looking new for longer.
  • Blocks 50% of the sun's total energy, keeping your home or office significantly more comfortable.
  • Durable scratch-resistant coating.
  • Increases personal safety by minimizing flying glass in the event of breakage.
Bee Safe 8.5m 35 Security Safety Glass Coating Chestermere

Broken glass can create a significant safety issue. Often when glass is smashed, small shards are scattered throughout the area. These small pieces of glass are difficult and dangerous to clean up. Bee Cool Safety and Security Glass Coatings bond to the glass, helping to keep it from scattering throughout your building, providing a barrier between broken glass and contact with any passers by, while removing a potential intruder's ability to gain quick and easy access.

    green check mark.
  • Bee Cool Safety & Security Glass Coatings have been evaluated according to the following test methods and standards:
    • Small Missile Impact Test - ANSI Z-97.1 and CPSC 16 CFR 1201
    • Large Missile Impact & Cyclic Wind Pressure Tests - ASTM E 1886-02 / ASTM E 1996-03, Level C, 4.5 lb 2" x 4"
    • GSA Explosive Test - GSA-TS01-2003
    • Flame Spread and Smoke Developed Test - ASTM E-84
Bee Safe 8.5m 35 Security Safety Glass Coating Chestermere Specifications
UV Rejected 99%
Glare Reduction 58%
Winter Heat Loss Reduction 3.5%
Total Solar Energy Rejected 60%
Visible Light Transmittance 35%
Total Solar Transmittance 27%
Total Solar Reflectance 27%
Total Solar Absorbance 46%
Interior Visible Light Reflectance 18%
Exterior Visible Light Reflectance 25%
Winter U-Value 1.07
Shading Coefficient 0.46

Physical Properties
Film Thickness 0.0085"
Single or Multi-Ply Multi
Tensile Strength 30,400 psi
Break Strength 265 lbs/inch
Elongation at Break > 100%
Peel Strength 2750 g/inch
Puncture Strength 173 lbs
Note: all data values above are representative and are provided for comparison purposes only.